FTI Calendar

This course introduces the basic terms associated with airless spray application and identifies the equipment components used. It also discusses proper spray application procedures and spray pattern problems.
@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.1817994851=Airless+Spray+Application+(Industrial)&entry.228960627=2020-01-02&entry.549838939=07:00

The American Red Cross or The American Heart Association emergency response, automated external defibrillation, and cardiovascular pulmonary resuscitation, as well as emergency response, automated external defibrillation, and cardiovascular pulmonary resuscitation (Certification Period: 24 months).

@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.1817994851=First+Aid/CPR&entry.228960627=2020-01-03&entry.549838939=07:00

Description:

OSHA 10 is a 2 day course. The first day will start at 4:00 pm and end at 8:00 pm. The second day will start at 7:00 am and end at 2:00 pm.

OSHA 10-Hour training for the construction industry requires instruction on the Focus Four Hazards, plus six elective courses. The Construction Focus Four include Fall Hazards, Caught In or Between Hazards, Struck By Hazards, and Electrocution Hazards. Special emphasis will be placed on areas most hazardous, as indicated in OSHA standards. Upon successful completion of the course (70%), students will receive an OSHA 10-Hour Construction Industry Outreach DOL course completion card.
@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.690296114=C51+1100C+-+OSHA+10&entry.1817994851=Construction/Introduction+to+Health+and+Safety+(Classroom-DC+51)&entry.228960627=2019-09-06&entry.549838939=16:00

Aerial lifts are another means of getting workers, equipment, and/or materials to where they are needed on the job. There are two basic kinds of aerial lifts: scissor lift and boom lift. Upon completion of this course, Students should be familiar with both boom and scissor lifts and their individual uses. They should know the safety rules, precautions and operation of man lifting devices; be able to perform a visual inspection prior to operating a man lifting device and be familiar with emergency related safety features associated with man lifting devices

@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.1817994851=Aerial/Scissor+Lift+Certification&entry.228960627=2020-01-04&entry.549838939=07:00

Description:

OSHA 10 is a 2 day course. The first day will start at 4:00 pm and end at 8:00 pm. The second day will start at 7:00 am and end at 2:00 pm.

OSHA 10-Hour training for the construction industry requires instruction on the Focus Four Hazards, plus six elective courses. The Construction Focus Four include Fall Hazards, Caught In or Between Hazards, Struck By Hazards, and Electrocution Hazards. Special emphasis will be placed on areas most hazardous, as indicated in OSHA standards. Upon successful completion of the course (70%), students will receive an OSHA 10-Hour Construction Industry Outreach DOL course completion card.
@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.690296114=C51+1100C+-+OSHA+10&entry.1817994851=Construction/Introduction+to+Health+and+Safety+(Classroom-DC+51)&entry.228960627=2019-09-06&entry.549838939=16:00

Automatic Taping Tools are the most commonly used methods of taping in the Drywall industry. Students will gain hands on experience while learning the parts, functions, safety, and maintenance procedures for using automatic taping tools. These experiences will also include the operation of the loading pump, loading procedures, proper holding techniques and the taping sequence.

@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.1817994851=AMES+Automatic+Taping+Tools&entry.228960627=2020-01-11&entry.549838939=07:00

This course provides an introduction to the safety requirements for constructing and working on scaffolds specified in 29 CFR 1926.451. The Erecting and Dismantling course covers at least the pre-planning, inspection of scaffold components, load capacity, platform construction, access, fall protection, falling objects protection, and dismantling.

@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.1817994851=Scaffold+UED&entry.228960627=2020-01-11&entry.549838939=07:00

This course, provided by Overton Safety Training, Inc. was designed in collaboration with the FTI to provide the knowledge and skills required for students to meet the ANSI, federal and state regulations, and manufacturer requirements for rigging. Students will demonstrate comprehension of the selection, inspection and safe use of basic rigging materials, hardware and other devices when attaching loads for overhead hoisting equipment.
@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.1817994851=Rigging+for+Cranes+(Overton)&entry.228960627=2020-01-18&entry.549838939=07:00

Falls are the second leading cause of death in the workplace. With the proper training and equipment, those deaths from falling could have been prevented. The objective of this Summit program, "Fall Protection: Taking Control," is to train your employees to recognize potential fall hazards in their work place and provide them with an understanding of the proper use and care of personal fall protection equipment, with an emphasis on fall arrest systems. The program also discusses the importance of a pro-active safety attitude in preventing work place falls (Certification Period: Permanent).

Each year, on average, between 150 and 200 workers are killed and more than 100,000 injured because of falls at construction sites. OSHA’s construction industry safety standard for fall protection 29 CFR,Subpart M, outlines systems and procedures designed to prevent employees from falling off, onto, or through working levels and to protect employees from being struck by falling objects. Here, we outline the basics and provide some “do’s” and “don’ts” for novices and those who need a refresher course. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, when required by OSHA standards, on the specific hazards of their job. Please note: This course is not a part of the OSHA 10 Hour Construction Program.

Fall Protection provides you with a look at the work conditions that require the use of fall protection and the available options to protect employees from falls. By taking this course, you will be able to identify fall protection methods available for protecting employees; the basic conditions that trigger the use of fall protection for employees in the general industry; and the importance of good work practices and training. Implementing each of these elements in your workplace will ensure that employees are protected from fall hazards whether four feet or forty feet from the ground.

@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.1817994851=Fall+Protection&entry.228960627=2020-01-18&entry.549838939=07:00

Automatic Taping Tools are the most commonly used methods of taping in the Drywall industry. Students will gain hands on experience while learning the parts, functions, safety, and maintenance procedures for using automatic taping tools. These experiences will also include the operation of the loading pump, loading procedures, proper holding techniques and the taping sequence.

@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.1817994851=AMES+Automatic+Taping+Tools&entry.228960627=2020-01-18&entry.549838939=07:00

@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.1817994851=OSHA+30&entry.228960627=2020-01-21&entry.549838939=07:00

@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.1817994851=OSHA+30&entry.228960627=2020-01-21&entry.549838939=07:00

@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.1817994851=OSHA+30&entry.228960627=2020-01-21&entry.549838939=07:00

@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.1817994851=OSHA+30&entry.228960627=2020-01-21&entry.549838939=07:00

In this course, students will study OSHA’s Permit-Required Confined Spaces standard (29 CFR 1910.146). This course is designed to enable students to recognize, evaluate, prevent, and abate safety and health hazards associated with working environment associated with confined space entry. Technical topics include the recognition of confined space hazards, basic information about instrumentation used to evaluate atmospheric hazards, and ventilation techniques (Certification Period: Permanent).
@register:https://docs.google.com/forms/d/e/1FAIpQLSe16CVjBZb9N-4iQzWPZrLTxvHuQHZoXjjmgQe86aNWl924QA/viewform?usp=pp_url&entry.1817994851=Confined+Space+Training&entry.228960627=2020-01-25&entry.549838939=07:00